To connect to the target: Fail Safe File System: Note that these pages transmit each line individually so will not load quickly. This will take approximately 20 seconds on a relatively fast PC. See the Source Code Organization section for a description of the downloaded files and information on creating a new project. I commented out all of the PA16 related lines in the code and everything started working.

Uploader: Vikora
Date Added: 7 July 2013
File Size: 21.40 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 44417
Price: Free* [*Free Regsitration Required]

RL-ARM User’s Guide (MDK v4): Getting Started

Fail Safe File System: Ensure an Ethernet cable is connected as described above. Sure enough, this board doesn’t have dataflash but it does at91sam7x-el the ability to control the USB pullup with – you guessed it – PA Entering the IP address into the web browser obviously use the correct IP address for your system.

These tasks consist predominantly of the standard demo application tasks see the demo application section for details of the individual tasks. When executing correctly the demo application will behave as follows: To connect to the target: You are right of course, the ‘x’ board is a bit of a pain when developing USB because of its inability to turn in on an off.

The demo application uses the LEDs built into the prototyping board so no other hardware setup is required.


AT91SAM7X256-EK Evaluation Kit,Ethernet,USB,UART,CAN,SD GPIO JTAG

at91sam7x-el Fail Safe File System: The next step in the roadmap was to add USB as this will be a great way to initially configure my custom board. Note that the LED DS4 is also under control of the ‘check’ tick hook so will toggle every 5 seconds – overwriting any commands sent from the web server. The mouse will only function when not using the debugger. Use these archive pages to search previous posts. It will spend most of its time blocked on a semaphore – waiting to be woken by interrupts generated by incoming network packets.

The uIP task This task handles all the network processing.

Welcome to AT91SAM Community Discussions

Click here to view a static menu. This makes the page relatively fast to load.

The served RTOS stats page The RTOS stats page provides run time information on the state of each task within the system – including the stack high water mark the minimum amount of stack there has been available at any time since the task started executing.

The target hardware will serve the web pages described below to at91sam7-ek standard web browser. The prototyping board should also allow the use of a standard Ethernet cable when connecting point to point, but I have not st91sam7x-ek this configuration.

Thread aware file system.


[RTOS Support] USB issue on Atmel AT91SAM7X-EK boards

This site required JavaScript to be enabled. Note to Linux users: The task performed a series of tests on the dataflash and displayed the results on a web browser using lwIP. Reset or initialize target before resuming “.

The continuous reloading can sometimes make navigating away from the RTOS stats page a little tricky.

Served Web Pages The top of each served page includes a menu containing a link to every other page. Switch to the debugging perspective.

Thread aware file system Hint: At91sam7x-sk The demo application creates 27 tasks. Posted by Richard on July 3, DS4 toggling every 5 seconds indicates that all the standard demo tasks are executing without error.

The archive is updated every week, so will not always contain the very latest posts. Use the tree menu to navigate groups of related pages.

See the Source Code Organization section for a description of the downloaded files and information on creating a new project.

Using the above demo as a guide, I added the USB to my new project but it didn’t att91sam7x-ek.