Verify the Ethernet port LED indicates a normal connection. Refer to next page for menu listing and default values. I started those services which seemed related to Plug and Play, and the installation went without further errors. Posted by grygolfnut on Apr 15, Posted on Apr 15,

Uploader: Daikora
Date Added: 23 August 2017
File Size: 53.5 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 18706
Price: Free* [*Free Regsitration Required]

I was wondering if there was a certain way to line up the two plastic pieces on each end of the carriage rail so that it is lined up to print the same density of characters from left to right. ACCEL — Accel IP Address: Posted on Apr 15, Uninstall any entries for Laserjet P The Windows driver is vistx available on our website: The printer receives data DTR: Please follow this link: Open up Device Manager.

Cindy Wells Level 3 Expert Answers.

We have xp and this printer is a parllel not a usb plug a play. How do I install this?

The third adjustment is the parallelism. This is the gap between the right side carriage bushing flange and the right frame. If the print data includes page length instruction, the printer will give priority to the print data instruction.


The printer is in High Speed Draft mode. This will fix the problem. Open the driver folder on the CD shipped with the printer. I assume that you have a plug-in Intelli-card in the printer. The printer is in Super High Speed Draft mode.

You would need to purchase an intelli-card in order to print as a standard printer. Can you tell me which driver I should download. Helpful 0 Not Helpful Comment Flag.

The lever moves the print head relative to the platen so that there is more room for the paper. Document Copyright Declaration Information in this manual is subject to change without notice and does not represent a commitment on the part of AMT Datasouth Corporation.

Insert the feeler gauge to determine the gap.

It should be USER1. These are the common wear parts on the printer and look like the problem your seeing.

AMT Datasouth Accel User`s guide |

Even though Plug n Play recognizes that new hardware is attached, when it proceeds with the installation it keeps saying there is no printer attached. First clean remove the contaminated oil and dust with a soft cloth, and then add proper lube light machine oil is recommendedmove print head back and forth to distribute lube. The gap range is 0. Open the tractor covers and place the paper onto the sprocket pins.


Username Password Remember Me. The printer will automatically replace it with other pin to print. Make sure that the power switch located on the left side of the printer is smt to OFF.

Have your printer ready to connect when instructed. And the USB cable works You can’t post conmments that contain an email address.